| Customization: | Available |
|---|---|
| Type: | RO |
| Salt Rejection: | 99.8% |
|
Still deciding? Get samples of US$ 780/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
As the world is facing freshwater scarcity, Hydranautics brings a range of SWC RO membranes to meet the demands of desalination industry. SWC membranes have improved the productivity and salt rejection for more than two decades while reducing their environmental impact. SWC membranes come in a range of innovative formulations depending on the level of seawater salinity required.
SWC membranes come in a range of innovative formulations suitable for varying degrees of seawater salinity. Each offers the highest productivity and salt rejection rates in the industry combined with the optimized flow, low fouling and low energy consumption.
This exceptional performance and consistency creates demand for SWC membranes in seawater desalination and high TDS industrial waste water treatment applications, including conventional and hybrid designs.
SWC5 membranes provide optimum salt rejection and permeate flows. They are chosen when lower permeate TDS and lower feed pressures are needed. SWC5 membranes offer highest energy efficiency at lowest costs and are used in mega desalination plants. SWC5 membranes are available in two different types of variants, LD and MAX
Low differential LD Technology models are offered to minimize colloidal fouling when used with conventional pre-treatment equipment. They offer consistently low feed pressures and highest duration between two successive cleanings.
The MAX models have a 440 ft2 (40.9 m2) active membrane surface area. They provide excellent performance with high TDS and boron removal from warm waters.
|
Model
|
SW-2521
|
SW-2540
|
SW-4014
|
SW-4021
|
SW-4040
|
SW-8040
|
|
Effective membrane area ft2(m2)
|
12(1.1)
|
30(2.8)
|
24(2.2)
|
33(3.1)
|
85(7.9)
|
380(35.2)
|
|
Operating pressure psi(Mpa)
|
800(5.5)
|
800(5.5)
|
800(5.5)
|
800(5.5)
|
800(5.5)
|
800(5.5)
|
|
Salt rejection(%)
|
99.5
|
99.5
|
99.5
|
99.5
|
99.5
|
99.8
|
|
Boron-removing rate(%)
|
92
|
92
|
92
|
92
|
92
|
92
|
|
Recovery rate(%)
|
4
|
8
|
4
|
4
|
8
|
8
|
|
Max. operating temperature(ºC)
|
45
|
45
|
45
|
45
|
45
|
45
|
|
Continuous runningwater PH range
|
3~10
|
3~10
|
3~10
|
3~10
|
2~11
|
2~11
|
|
Chemical cleaningwater PH range
|
2~12
|
2~12
|
2~12
|
2~12
|
2~12
|
2~12
|
|
Test water concentration(ppm)
|
32000 mg/L (as NaCI)
|
32000 mg/L (as NaCI)
|
32000 mg/L (as NaCI)
|
32000 mg/L (as NaCI)
|
32000 mg/L (as NaCI)
|
32000 mg/L (as NaCI)
|
Tianjin Morui Environment&Technology Co., Ltd. (refer to Tianjin MR), is professional company which is committed to become processing manufacturer of pipeline system solutions. Located in the Tianjin High-tech Zone as headquarter. There are several branches in Shandong, Shanxi and Shanxi provinces.
We are not only processing manufacturer, but also it has the own sales and service network. We are able to grasp accurately the clients' "pain points" that the clients faced. And provide the proper solutions immediately. Because we have the excellent team who are focusing on follow-up service.
The Tianjin MR company's products have been widely used in the field of MF, UF and RO system, sewage water system, water supply and drainage, high-pressure desalination system, such as garbage infiltration liquid, electronic, chemical industry, air-conditioning and so on. Our products are compliance with international first-class standard(GB, ASTM, DIN and JIS). Meanwhile providing the professional before-sale and after-sale service to our clients.
| Production line |
1.Q:Are you a factory or tradingcompany?
){kind=link}